Installation guide

6-3
Installing the Software Driver for Novell NetWare
8
If prompted to load an SMP Module, select
No
. (The SMP
Module can be installed once NetWare is up and running.)
9
When a screen appears that asks you to select a disk driver,
press
Enter
.
10
Press
Insert
to install an unlisted driver.
11
Insert the Adaptec Array1000UDMA Family Manager Set
driver disk into your floppy disk drive.
12
Press
F3
and specify the path to the
cdaudmah.ham
driver. For
NetWare 4.11, the driver is located in
a:\v4_1x
.
13
Select
cdaudmah.ham
and press
Enter
.
14
When prompted to save existing file
c:\nwserver\nbi.nlm
, select
No
.
15
When prompted to save existing file
c:\nwserver\nwpaload.nlm
, select
No
.
16
When prompted to save existing file
c:\nwserver\nwpa.nlm
,
select
No
.
17
When prompted, select
Select/Modify driver parameters
.
18
Enter a valid slot number, then press
Enter
to save field data.
19
Press
F10
to save parameter settings.
20
When prompted, select
Save parameters and continue
.
21
Select
No
when prompted to select an additional disk driver.
22
Select
Continue Installation
.
23
When NetWare installation is complete, install Adaptec CI/O
Management Software from the server console. Refer to the
Adaptec CI/O Management Software User’s Guide
for instructions
on installing and using the software.