Installation guide

8
SCSI Card 2906
Note:
If it is difficult to reach behind your internal SCSI
devices mounted in the drive bay, try connecting the inter-
nal SCSI devices to the SCSI cable and power supply (Steps
5 - 7 below) before securing each SCSI device inside your
computer.
4
Connect one end of the internal SCSI cable to the SCSI Card
2906 internal SCSI connector as shown below.
To connect more than two internal SCSI devices to the SCSI
Card 2906, you will need an internal SCSI cable with enough
connectors for all devices. See the SCSI Card 2906 User’s Refer-
ence for additional information on connecting your SCSI
devices and ordering cables.
Colored Stripe
(Blue or Red)
(To Note Pin 1)
Pin 1
Marking
Internal SCSI
Connector
Standard 50-pin
Internal SCSI Cable
(included in package)
Key