Installation guide

16
SCSI Card 2906
4
Select File/Run from the Program Manager menu.
5
When the Run dialog box appears, type
a:\setup
if you are
using the A drive, or
b:\setup
if you are using the B drive. Then
click OK.
6
Follow the instructions that appear on-screen.
Computers with DOS 6.x or Above
1
Turn on all external SCSI devices and then the computer.
2
Insert the Adaptec EZ-SCSI diskette for DOS and Windows 3.1
into the floppy disk drive.
3
At the DOS prompt, type
a:\dosinst
if you are using the A
drive, or
b:\dosinst
if you are using the B drive. Then press
Enter.
4
Follow the instructions that appear on-screen.
Congratulations!
You have finished installing SCSI Card 2906.