Installation guide

3
SCSI Card 2906
4
In Device Manager, double-click Computer at the top of the
list.
5
In the Computer Properties window, click Interrupt request
(IRQ) (if it is not already selected) as shown in the following
sample screen:
■
The Settings column lists the IRQs in use. IRQ settings range
between 0 and 15. If an IRQ setting is not listed under Settings
this means it is available. In the screen sample above, setting 10
is not listed and, therefore, is an available IRQ.
Note:
Do not use an IRQ below IRQ 9 for a SCSI Card 2906.
Do not allow the SCSI Card 2906 and another card to share
the same IRQ.
■
If an IRQ setting is available, you may begin this installation. If
an IRQ setting is not available, you will not be able to install
this SCSI card. See the section titled Troubleshooting in Windows
95/98 in the SCSI Card 2906 User’s Reference for additional infor-
mation on IRQ settings.