User`s guide

VideOh! DVD Media Center: Getting Started

Installing Your AVC-2410

To install your VideOh! DVD Media Center hardware and

software:

1 Discharge any static electricity build-up before handling the

AVC-2410 card by touching a grounded metal object (such as

the exposed metal parts on the back of your computer).

2 Turn off power to the computer and disconnect the power cord.

Open the computer cabinet, following the manufacturer’s

instructions.

3 Locate an unused PCI expansion slot and remove the expansion

slot cover. Save the slot cover screw for use in Step 6

4 Remove the AVC-2410 card from its antistatic packaging.

Caution: Always handle the card by its edges or metal

bracket. Do not touch the gold PCI connector or any

components on the card.

5 Insert the AVC-2410 card into the PCI expansion slot. Press

down firmly until the card clicks into place. When installed

properly, the card should appear level with the expansion slot.

Note: Depending on the tightness of the PCI slot, gentle but

firm force may be required to insert the card.

PCI expansion slots

Expansion slot

cover