User`s manual

102
Chapter C - GDT User’s Manual
At the end of this Array Build we press <ENTER>.
GDTSETUP now checks if you have made changes to the system configuration which r e-
quire a warm reboot of the system. This is true for our example.
IMPORTANT: Always end GDTSETUP by leaving the program in the regular way (do
not warm boot with CTRL-ALT-DEL or cold boot by pressing the RESET button). Ce r-
tain information is only transferred to the controller when you quit GDT SETUP in
the regular way.
After the MS-DOS reboot and the loading of GDTX000, we start GDTSETUP again. We select
the menu Configure Host Drives and check the new status of our previously created disk array.
The main screen of this menu should display: