User`s manual

Chapter J - GDT User's Manual

1. Load the Registry Editor regedt32.exe in \winnt35\system32

2. Select the window HKEY_LOCAL_MACHINE on Local Machine

3. Choose the Key gdtx in the directory SYSTEM\CurrentControlSet\Services\ .

4. Enter by means of Edit, function Add Key, the name Parameters .

Select Parameters .

5. Enter by means of Edit, function Add Key, the name Device .

Select Device .

6. Enter by means of Edit, function Add Value, the name DriveParameter .

7. Use data type REG_SZ.

Now enter the parameter string (e.g.): /reserve:0,0,4,0 .

(This string causes the SCSI-device connected with GDT controller 0, SCSI channel 0,

SCSI ID 4, LUN 0 to be reserved as a Raw Device. GDT controller 0 is the GDT controller

which is detected and configured first after switching on your computer system).

8. The reservation of the SCSI-device becomes active after completing regedt32, exiting

and rebooting the system.