User`s manual

89
Chapter C - Quick-Setup
The warning of the destruction of all data implies different evaluations, according to the
drives current state and the options you have selected in the dialog box:
1. First Initialisation of the SCSI Device.
In this case the warning must be taken seriously. If the drive was previously connected to
a different controller (e.g. Adaptec etc.) and still contains data, this data will be lost
now.
2. Format Disk and/or Surface Check enabled.
In this case, regardless of the drive's previous settings, all data is destroyed.
3. The SCSI Device was already initialized.
If only internal parameters such as Disconnect, Synchronous Transfer, and SCSI-II o p-
tions have been changed, the data on the drive remains intact. Only the function status
of the device changes.
We leave this screen now by clicking <OK> and are back on the main screen of level 1. We
see that the initialisation-status of the SCSI-devices has changed.