User`s guide

Chapter 11: Solving Problems ● 144
ChangeLogicalName Could not change the name of the specified logical drive
ChangeNtpServer Could not update the specified NTP server
ChangeTimeDate Could not change the date and time
ChgAlarm Could not change the alarm setting
ChgDataScrubRate Could not change the background consistency check rate
ChgRebuildRate Could not change the rebuild rate
ChgSCSIXferSpeed Could not change the SCSI transfer speed
ChgStripeSize Could not change the specified stripe size
ChgTaskPriority Could not change task priority
ClearAdapterLogsFail Could not clear the event logs for the specified system
ClearEnclosureLogsFail Could not clear the event logs for specified enclosure
ClearHardDrive Clear failed to start for the specified disk drive
CommFailure You must re-establish communication with specified system
CommFailure1 Restart the Adaptec Storage Manager Agent to establish communication with the local system
ControllerRescan Could not rescan for the specified controller
ControllerRestart Could not restart the specified controller
ControllerShutDown Could not shut down the specified controller
CreateDiskSet Could not create the diskset
CreateLDError There was an error creating specified logical drive
CreateSimpleVolume Could not create a simple volume
DataScrub Could not change the background consistency check mode
DDDAdInternal Failed drive—Controller internal failure
DDDDeviceNotFound Failed drive—Device not found
DDDDeviceNotReady Failed drive—Specified device will not come ready
DDDDriveAddedToSystem Failed drive—Specified disk drive added to server
DDDDriveNotBelong1 Failed drive—Specified disk drive does not belong
DDDDriveNotBelong2 Failed drive—Specified disk drive does not belong
DDDDriveNotFound Failed drive—Specified disk drive not found
DDDDriveNotPartOfCluster Failed drive—Specified disk drive is not part of the cluster
Error Error Message Text