User`s guide

Chapter 11: Solving Problems ● 147
LogOut The user could not be logged out
MaybeReadCache Could not set read cache mode to 'enabled when protected by battery'
MaybeWriteCache Could not set write cache mode to 'enabled when protected by battery'
MergeOwnNS Could not copy the configuration from the non-shared logical drives
Rebuild Could not set the drive to the specified rebuild state
RemoveAHS Could not delete the dedicated hot spare drive
RemoveFromDiskSet Could not remove drives from the specified diskset
RemoveHSP Could not delete the specified hot spare drive
RemoveSHS Could not delete the specified standby hot-spare drive
ReplaceDHS Could not replace the specified failed drive
ScanDrives Could not perform the bus rescan
SetArrayOnline Could not send the Array Optimal command to the specified controller
SetChannelInitiatorId Could not set the specified SCSI initiator ID
SetContDiskCachePolicy Could not change the specified global drive cache policy
SetHostId Could not set the specified controller name
SetITNexusLossTime Could not change I_T nexus loss time
SetMergeGroup Could not set the specified merge-group number
SetPartnerId Could not set the specified partner controller name
SetSpareSet Could not change the specified spare set attribute
SetToAHotSpare Could not create a dedicated hot spare drive
SetToDefunct Could not set the specified drive to failed
SetToEmpty Could not remove the specified failed drive
SetToHotSpare Could not create a hot-spare drive
SetToOnline Could not set the specified failed drive to optimal
SetToSHotSpare Could not create a standby hot-spare drive
SetWce Could not change the write-cache mode
SyncArray Could not start the array verify
SyncLogDrive Could not start the logical drive verify
TargetInfo Could not write the logical drive target information
Error Error Message Text