User`s guide

Glossary ● 177
M
managed system
A computer (or system) in a storage space that’s being managed by Adaptec Storage Manager.
MB
MegaByte. Depending on context, 1,000,000 or 1,048,576 bytes. Also 1000 KB.
mirroring
Data protection that duplicates all data from one drive onto a second drive. See also RAID.
N
Notification Manager
A utility within Adaptec Storage Manager that broadcasts event messages to selected managed systems.
P
parity
A form of data protection used by some RAID levels to re-create the data of a failed disk drive in a logical
drive. See also RAID.
partition
Divides the space of a disk drive into isolated sections.
port
A connection point to a controller, disk drive, expander, enclosure, or other device.
R
RAID
Redundant Array of Independent Disks. For more information on RAID and all supported RAID levels, see
Selecting the Best RAID Level on page 153.
rapid fault isolation
The trail of yellow or red warning icons that leads from the high-level system view to the failed or failing
component.
rebuild
Re-create a logical drive after a disk drive failure.
recurring task
A scheduled task, such as logical drive verification, that occurs on a regular basis. See also Task Ma nag er,
scheduled task.
redundancy
The capability of preventing data loss if a disk drive fails. See also mirroring, parity.
remote system
In Adaptec Storage Manager, all other systems in your storage space besides your local system are remote
systems. ‘Local’ and ‘remote’ are relative terms. See also local system.
ROM Update wizard
A program that updates the BIOS and firmware codes on the controller. See also firmware.