User`s guide

Chapter 2: Installing Adaptec Storage Manager ● 22
Installing on Solaris
Note: If a previous version of Adaptec Storage Manager is installed on your system, you must
remove it before beginning this installation. Any customization files you created with the previous
version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the
pkgrm
RaidMan
command.
To install Adaptec Storage Manager on Solaris:
1 Insert the Adaptec RAID Controller Installation DVD.
The DVD mounts automatically. (If it doesn’t, manually mount the DVD using a
command similar to the one shown below. Refer to your operating system documentation
for detailed instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
2 Install Adaptec Storage Manager:
pkgadd -d/<mount point>/ASMCD/solaris_x86/manager/StorMan.pkg
3 Follow the on-screen instructions to complete the installation.
4 Eject or unmount the Adaptec RAID Controller Installation DVD. Refer to your operating
system documentation for detailed instructions.
Installing on FreeBSD
To install Adaptec Storage Manager on FreeBSD:
1 Insert the Adaptec RAID Controller Installation DVD.
2 Mount the Adaptec RAID Controller Installation DVD:
mount -F cd9660 -o ro /dev/acd0 /<mount point>
where mount point is the mount point of the DVD-ROM.
3 Install Adaptec Storage Manager:
For FreeBSD for x86 (32-bit):
pkg_add /<mount point>/ASMCD/freebsd7/manager/StorMan-x86.pkg.tbz
For FreeBSD for amd64 (64-bit):
pkg_add /<mount point>/ASMCD/freebsd7_x86_64/manager/StorMan-amd64.pkg.tbz
where mount point is the DVD-ROM mount point.
Note:
The installation DVD also includes packages for FreeBSD 8.
4
Follow the on-screen instructions to complete the installation.
5 Unmount the Adaptec RAID Controller Installation DVD:
umount /<mount point>