User`s guide

3
English
b Select Array Configuration Utility, then press Enter. The ACU Menu
displays.
c Select Initialize Drives, then press Enter.
d Select at least three HDDs for a RAID 5 array or two disks for a RAID 1. Press
Insert for each selected HDD, then press Enter.
e Press Y, then press Enter. The selected drives are initialized, then the ACU
Menu displays.
Warning: Initializing HDDs deletes all data stored on these drives. Back
up any data you want to keep before initializing the HDDs.
f
Select Create Array, then press Enter.
g Select the HDDs you just initialized, press Insert for each selected HDD, then
press Enter.
h On the Array Properties screen, respond as follows:
i When a cache warning message is displayed, type Y.
Array Type Select RAID 5 or RAID 1, then press Enter.
Array Label Type a name, then press Enter.
Array Size Press Enter, then press Enter again to use the default
granularity of GB.
Stripe Size Press Enter to use the default (256KB).
Read Caching Press Enter to use the default (Yes).
Write Caching Press Enter to use the default (Enable always).
Create RAID via Press Enter to use the default (Build/Verify).
[Done] Press Enter.