Installation guide

4-2
controller Commands
controller details
To display details about the currently opened controller, use the
controller details command. These details include the
controller type and software revision levels.
Syntax
controller details
Examples
The following example shows sample output as a result of using
the controller details command:
AAC0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: YETI
Device Name: aac0
Controller type: Adaptec 5400S
Access Mode: READ-WRITE
Controller serial number: Last six digits = 8A277A
Number of Channels: 4
Devices per Channel: 15
Controller CPU: Strong Arm 110
Controller CPU speed: 233 Mhz
Controller Memory: 144 Mbytes
Battery State: Ok
Component Revisions
-------------------
CLI: 2.1-0 (Build #2881)
API: 2.1-0 (Build #2874)
Miniport Driver: 2.1-0 (Build #2874)
Controller Software: 2.1-0 (Build #2874)
Controller BIOS: 2.0-1 (Build #2874)
Controller Firmware: (Build #2874)
Controller Hardware: 1.0
The following sections provide more information on the items that
the controller details command displays.
Device Name Item
The Device Name: item displays the name of the controller. This is
the controller name specified when you opened the controller with
the
open command. In the example, the controller name is aac0.