Installation guide

4-5
controller Commands
Related Commands
General control commands:
■ open (page 2-6)
Service: Displays the revision level of the network
services software. This item displays only if
the open controller resides on a remote
computer. In the example, the revision level is
2.1-0 (Build #2881).
Remote API: Displays the revision level of the API that the
network services software uses on the remote
computer. This item displays only if the open
controller resides on a remote computer. In the
example, the revision level is 2.1-0 (Build
#2881).
Miniport Driver: Displays the version number of the miniport
portion of the AAC.SYS device driver. This
item displays only if the controller runs the
AAC.SYS device driver. In the example, the
revision level is 2.1-0 (Build #2874).
Controller Software: Displays the revision level of the controller
software. In the example, the revision level is
2.1-0 (Build #2874).
Controller BIOS: Displays the revision level of the controller
BIOS. In the example, the revision level is 2.0-1
(Build #2874).
Controller Firmware: Displays the revision level of the firmware. In
the example, the revision level is (Build #2874).
Controller Hardware: Displays the version of the controller
hardware. In the example, the version is 1.0.
Table 4-3 Component Revision Items (Continued)
Component Revision Item Meaning