Installation guide

4-10
controller Commands
controller list
To list all controllers on a specified computer or display specific
information about the currently opened controller, use the
controller list command.
Syntax
controller list [/domain{=string}] [{string}]
Parameters
{string}
Specifies the computer name from which you want to display
a list of controllers or specific information about the currently
opened controller. If you do not specify a computer name, the
command displays only the controllers on the local computer.
Switches
/domain{=string}
Specifies the domain in which the specified computer resides.
If you do not specify this switch, the command assumes the
local domain.
This switch is supported on Windows.
Examples
The following example shows how to list all controllers on a local
computer:
AAC0> controller list
Executing: controller list
Adapter Name Adapter Type Availability
------------ ------------ ------------
\\.\AAC0 Adaptec 5400S read/write
The following sections provide descriptions of the items in the
display.
The Adapter Name and Adapter Type Items
The Adapter Name item displays the name(s) of all controllers on
the local or remote computers. In the example, there is only one
controller on the local computer and it is called AAC0.