Installation guide
Table Of Contents
- Command Line Interface
- Reference Guide
- Introduction
 - General Control Commands
 - container Commands
- container add_level
 - container create mirror
 - container create mmirror
 - container create mstripe
 - container create mvolume
 - container create raid5
 - container create stripe
 - container create volume
 - container delete
 - container extend file_system
 - container extend mvolume
 - container extend volume
 - container list
 - container lock
 - container move
 - container promote
 - container readonly
 - container readwrite
 - container reconfigure
 - container release_cache
 - container remove drive_letter
 - container remove failover
 - container remove file_system
 - container remove global_failover
 - container restore RAID5
 - container scrub
 - container set cache
 - container set failover
 - container set global_failover
 - container set io_delay
 - container set label
 - container show cache
 - container show failover
 - container split
 - container unlock
 - container unmirror
 
 - controller Commands
- controller details
 - controller firmware compare
 - controller firmware save
 - controller firmware update
 - controller list
 - controller pause_io
 - controller rescan
 - controller reset_scsi_channel
 - controller resume_io
 - controller set automatic_failover
 - controller set array_verify
 - controller show automatic_failover
 - controller show channels
 - controller show array_verify
 
 - disk Commands
 - diagnostic Commands
- diagnostic clear boot_parameters
 - diagnostic dump structures
 - diagnostic dump text
 - diagnostic load_arrays
 - diagnostic moderation set count
 - diagnostic moderation set timer
 - diagnostic moderation show count
 - diagnostic moderation show timer
 - diagnostic set boot_parameter
 - diagnostic show boot_parameter
 - diagnostic show history
 
 - logfile Commands
 - task Commands
 - enclosure Commands
- enclosure activate slot
 - enclosure identify slot
 - enclosure list
 - enclosure prepare slot
 - enclosure set alarm
 - enclosure set door
 - enclosure set fan
 - enclosure set interval
 - enclosure set power
 - enclosure set scsiid
 - enclosure set temperature
 - enclosure show fan
 - enclosure show power
 - enclosure show slot
 - enclosure show status
 - enclosure show temperature
 
 - Automated Scripts
 
 
 - Reference Guide
 

5-7
disk Commands
The Device Type Column
The Device Type column displays the SCSI device type. The disk 
list command can display one of the values listed in Table 5-1.
Table 5-1 Device Type Values
The Removable media Column
The Removable  media column displays the value Y if the media 
in the device is removable and the value N if the media in the 
device is not removable.
The Vendor-ID and Product-ID Columns
The Vendor-ID column displays a string of characters that 
identifies the vendor of the SCSI device.
The Product-ID column displays a string of characters that 
identifies the product line associated with the SCSI device.
Value Meaning
Disk The device type is a SCSI direct access device. 
Typically, these are disk drives. This value appears 
in the example.
Sequential The device type is a SCSI sequential access device; 
typically, tape drives.
Printer The device type is a SCSI printer device.
Processor The device type is a processor device.
Write once The device type is a SCSI write once and read many 
times device. Typically, these devices are referred 
to as WORM disk drives.
CDROM The device type is a SCSI CD-ROM (read-only 
direct access device).
Scanner The device type is a SCSI scanner device.
Optical The device type is a SCSI optical disk device.
Medium changer The device type is a SCSI medium changer device; 
typically, a changer for a Jukebox.
Network The device type is a SCSI network communication 
device.










