Installation guide

6-12
diagnostic Commands
diagnostic show boot_parameter
To display a specific boot-time parameter (if one exists) that a
technical support representative might need, use the diagnostic
show boot_paramter command.
Caution: Use this command only under the direction of
technical support.
Syntax
diagnostic show boot_parameter
Parameters
{string}
Specifies the boot-time parameter character string whose
associated value you want to display. If you need to use this
command, a technical support representative will tell you the
name of the boot-time parameter to use.
Related Commands
diagnostic commands:
■ diagnostic clear boot_parameters (page 6-2)
■ diagnostic set boot_parameter (page 6-11)
!