Installation guide

8-3
task Commands
As the example shows, the typical display shows the following
columns of information:
■ TaskId
■ Function
■ Done%
■ Array
■ State
■ Specific1
■ Specific2
The following sections describe each column that the task list
command displays.
The Task ID Column
The Task ID column displays the ID number associated with a
specific task. The controller assigns each task a unique ID number.
The Function Column
The Function column displays the type of task running on the
controller. Table 8-1 describes the types of tasks that the task
list command can display.
Ta bl e 8 -1 Ta s k Types
Task Type Meaning
Create A create mirror set or create multilevel mirror set task is
running on the specified array. When the create mirror set
or create multilevel mirror set task completes, the specified
array is a mirror set or a multilevel array of mirror sets. The
create a mirror set or create a multilevel mirror set task runs
as a result of using the
array create mirror or
array create mmirror command.
FATfmt An array format FAT file system task is running on the
specified array. The format FAT file system task runs as a
result of using the
array format command with the /
file_system
switch set to FAT.