Installation guide
Table Of Contents
- Command Line Interface
- Reference Guide
- Introduction
- General Control Commands
- container Commands
- container add_level
- container create mirror
- container create mmirror
- container create mstripe
- container create mvolume
- container create raid5
- container create stripe
- container create volume
- container delete
- container extend file_system
- container extend mvolume
- container extend volume
- container list
- container lock
- container move
- container promote
- container readonly
- container readwrite
- container reconfigure
- container release_cache
- container remove drive_letter
- container remove failover
- container remove file_system
- container remove global_failover
- container restore RAID5
- container scrub
- container set cache
- container set failover
- container set global_failover
- container set io_delay
- container set label
- container show cache
- container show failover
- container split
- container unlock
- container unmirror
- controller Commands
- controller details
- controller firmware compare
- controller firmware save
- controller firmware update
- controller list
- controller pause_io
- controller rescan
- controller reset_scsi_channel
- controller resume_io
- controller set automatic_failover
- controller set array_verify
- controller show automatic_failover
- controller show channels
- controller show array_verify
- disk Commands
- diagnostic Commands
- diagnostic clear boot_parameters
- diagnostic dump structures
- diagnostic dump text
- diagnostic load_arrays
- diagnostic moderation set count
- diagnostic moderation set timer
- diagnostic moderation show count
- diagnostic moderation show timer
- diagnostic set boot_parameter
- diagnostic show boot_parameter
- diagnostic show history
- logfile Commands
- task Commands
- enclosure Commands
- enclosure activate slot
- enclosure identify slot
- enclosure list
- enclosure prepare slot
- enclosure set alarm
- enclosure set door
- enclosure set fan
- enclosure set interval
- enclosure set power
- enclosure set scsiid
- enclosure set temperature
- enclosure show fan
- enclosure show power
- enclosure show slot
- enclosure show status
- enclosure show temperature
- Automated Scripts
- Reference Guide
9-10
enclosure Commands
Specifically, the column can display the items listed in Table 9-2.
Table 9-2 Diagnostic Status
The EnclosureId, VendorId, and ProductId Columns
The EnclosureId column displays an identification number that is
unique for each enclosure management device product sold by a
particular manufacturer.
The VendorId column displays a string that identifies the
manufacturer of the enclosure management device. In the example,
the string that identifies the manufacturer of enclosure
management devices 0 and 1 is ESG-SHV.
The ProductId column displays a string that identifies the
enclosure management device’s product ID. In the example, the
product ID for enclosure management devices 0 and 1 is SCA
HSBP M2.
The Firmware Column
The Firmware column displays the current firmware revision of
the enclosure management device. In the example, the firmware
revision for enclosure management devices 0 and 1 is 0.14.
Related Commands
enclosure commands:
■ enclosure show fan (page 9-26)
■ enclosure show power (page 9-29)
■ enclosure show slot (page 9-32)
■ enclosure show status (page 9-36)
■ enclosure show temperature (page 9-41)
Status Meaning
PASSED No errors were detected and the diagnostic self-tests
were successful. This is the value displayed in the
example for both enclosure management devices.
FAILED Errors were detected and the diagnostic self-tests were
not successful.
UNKNOWN The status of the diagnostic self-tests is unknown.