Specifications

10
11
Alternatively, the Transponder can be mounted with the Hinge
Bracket tabs facing outwards as shown in Figure 4.
Figure 4
MOUNTING THE VISUAL ALERT
The Visual Alert is designed to be mounted on any part of the
motorcycle that is easily be seen by the rider. The LEDs should
be pointed directly at the rider’s face.
There are two mounting options for the Visual Alert.
Option 1: Using Double-Sided Adhesive Tape
• Determine an appropriate location for mounting the Visual
Alert. The surface directly above the gauges is an ideal
location on many motorcycles.
• Clean the bottom surface of the Visual Alert and the chosen
mounting surface on the motorcycle with mild soap and
water. Rinse with water to remove all traces of soap.
• Once the surfaces are clean and dry, remove one liner of
the Visual Alert Mounting Tape and apply to the bottom
surface of the Visual Alert.
• Remove the other liner of the Visual Alert Mounting Tape
and apply the Visual Alert to the chosen mounting surface
on the motorcycle using firm pressure.
• Allow mounted assembly to sit overnight while tape
increases bond strength.
Option 2: Using Cable Ties
• Determine an appropriate location for mounting the Visual Alert.
• Fasten with Large Cable Ties as shown in Figure 5.
Figure 5