Specifications

BETA BRITE Programming Manual

6 Basic sign operation: Turning a sign on and off

Basic sign operation

Turning a sign on and off

When you plug in the sign’s power supply, the sign starts up

automatically, and unplugging the power supply turns the sign off.

However, instead of unplugging a sign, there is another way to turn

the sign off:

Holding down

FCN

and then press

PROGRAM

turns a sign off and on.

NOTE: Messages that you have programmed into the sign will

not

lost when you turn a sign off. Messages will be retained for

up to 30 days if the sign is not powered.

When a signs starts up, the following will be displayed:

1036-0001A

THEN

32K RAM

The software (or “ﬁrmware”) version inside the sign.

WED 1:26 PM

THEN

The amount of memory inside the sign.

The time and date of the sign.