Instruction manual

Page 12
Revision : 002
BOLERO
Lighting Technologies
Remote Control (option)
One of the options available for the BOLERO is the ability to remotely use the Effect
section START/STEP button.
This operation is identical to that button on the desk itself, and is detailed in the
relevant section of the manual. No button has preference over the other.
The remote control is plugged into the AUX socket on the back panel. The remote
START/STEP button will short pins 2 and 4 when used.
If either of the START/STEP buttons (desk or remote) are pressed and held the
operation of the other button is not impaired, as it is the initial press that initiates the
action.
Analogue Output (option)
The option of analogue output, in addition to the standard
DMX512/1990 output, is available in one of two formats.
Either as a current driven output (0 to 370uA)
or as a voltage driven output (0 to +10V).
If the analogue output option is fitted then the
output format will be marked on the back panel,
with a mark in the appropriate box.
2 = STEP
4 - 5 = 0V
AUX DIN 5
5
4
3
1
2
0-370 µ A
0-10V
O1
O2
O3
O4
O5
(1)
BOLERO
START/STEP
(1) any type of switch