Operation Manual

DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 36
Issue 1.2
11.3.1 REMOVING STEPS
Whilst recording (above), if the step that you add is not correct, the last step may be deleted
by pressing [remove].
11.3.2 CHASER SPEED
At any point after giving the chaser a submaster (above), repeated presses of [function] will
toggle the display between the STEP number, the SPEED in BPM (Beats Per Minute) and
the CROSSFADE percentage. When the SPEED is displayed, the EDIT wheel may be used
to set the desired speed. The default setting is 100 BPM but you may change this in the
“Setup Preferences”. See the “UTILITIES” section.
11.3.3 CHASER CROSSFADE
At any point after giving the chaser a submaster, repeated presses of the [function] button
will toggle the display between the STEP number, the SPEED setting in BPM (Beats Per
Minute) and the CROSSAFDE percentage. When the IN & OUT indicators are lit, the EDIT
wheel may be used to set the percentage of the chaser speed time that is used for the
crossfade.
The default setting is 0% (no crossfade) but you may change this in the “Setup Preferences”.
11.3.4 COMPLETING THE CHASER
When all steps have been recorded, and the speed and crossfade have been set, complete
the chaser by pressing [record chaser].
The chaser will be a conventional forward running chase. To select other chaser modes
either [select] or [edit] the chaser as described below.
11.4 NAMING A CHASER
Each chaser is by default given its Bank B, page and f/a number as a name. For example,
B1:02 (bank B, page 1, chase 2).
To enter or change a name, HOLD [function], tap [f/a] (name) (bank A f/a button). The
display says “Pick Object to Name”. Press [page] (optional) [f/a] (submaster memory
number). Either rotate the EDIT wheel or press the [f/a] buttons for the desired characters or
the bank [f/a] buttons for numbers 1 to10 (0) as labelled below the buttons. Where several
characters are printed below each button, multiple presses select the next character in a
similar fashion to a mobile telephone keypad.
Press [<] or [>] to move the cursor and press [remove] or [add] to remove or add characters
or spaces. When finished, press [ok].
11.5 CHASER PLAYBACK
Chasers may be replayed on the:
• Submasters
• Grab master
• As a step in a Cue list.]
11.5.1 SUBMASTERS
When you set the mode to “memory”, the chasers (and memories) in the current page are
copied, in order, to their respective submasters.
If you change pages, the chasers (and memories) in the selected page are copied, in order,
to their respective submasters.