Operation Manual

DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 38
Issue 1.2
11.7.3 GLOBAL SPEED CONTROL
Global speed control allows you to speed up or slow down all chasers that are running on the
output whilst still retaining any different relationships in speed that might exist between each
other.
To activate “Global Speed Control” HOLD [select] for 1 second then release.
Rotate the EDIT wheel to speed up or slow down all running chases.
The speed can be increased by up to 1999% of its original value. The maximum speed is
limited to 999 BPM.
The speed can be decreased to 0% of its original speed.
For example:
• A1.01 has a recorded speed or 120BPM and its fader is at 100%.
• A1.02 has a recorded speed or 200BPM and its fader is at 0%.
• A1.03 has a recorded speed or 60BPM and its fader is at 10%.
Hold down [select] for 1 second to activate “Global Speed Control”. This will assign A1.01
and A1.03 to Global Speed Control.
Now fade up chaser A1.02. As it was not active when global speed was selected, it will not
be affected when the global speed is varied.
Rotate the EDIT wheel until the display reads 50%.
• A1.01 is now running at 60 BPM.
• A1.02 is still running at 200 BPM.
• A1.03 is now running at 30 BPM
Rotate the EDIT wheel until the display reads 200%;
• A1.01 is now running at 240 BPM.
• A1.02 is still running at 200 BPM.
• A1.03 is now running at 120 BPM
Tapping [function] resets all selected chasers to the “default” chaser speed as set in the
“Setup”, “Preferences” menu.
If the default is set to 100 BPM, then in this example, tapping [function] results in;
• A1.01 is now running at 100 BPM.
• A1.02 is still running at 200 BPM.
• A1.03 is now running at 100 BPM
Rotate the EDIT wheel until the display reads 150%;
• A1.01 is now running at 150 BPM.
• A1.02 is still running at 200 BPM.
• A1.03 is now running at 150 BPM
To exit Global Speed press [select].
All chasers remain at their modified speed. The original speed of the chaser can be restored
by copying the chaser back into the submaster. Press [copy], [f/a], to the same [f/a].