Operation Manual

DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 44
Issue 1.2
If you do not enter a time then the default settings will be used. The default step times are;
• SUBMASTER MEMORY = the fade times from that SUBMASTER MEMORY.
• LINK = No link.
• SNAPSHOT = rotating speed fader.
(You can change the default times with the “Setup Preferences” function. See the
“UTILITIES” section).
See REPLAYNG CUE LISTS below for more details on fade and link times.
13.3 NAMING A CUE LIST
Each cue list is by default given its Bank B and f/a number as a name. For example, b1:03
(Bank B, page 1, cue list 3).
To enter or change a name, HOLD [function], tap [f/a] (name).
The display says “Pick Object to Name”. Press [] (optional) [f/a] (cue list number)
Either rotate the EDIT wheel or press the channel A [f/a] buttons for the desired characters
or the bank B [f/a] buttons for numbers 1 to10 (0) as labeled below the buttons. Where
several characters are printed below each button, multiple presses select the next character
in a similar fashion to a mobile telephone keypad.
Press [<] or [>] to move the cursor and press [remove] or [add] to remove or add characters
or spaces. When finished, press [ok].
13.3.1 NAMING EACH STEP IN A CUE LIST
See “EDITING A CUE LIST” below
13.4 CUE LIST PLAYBACK
To playback a cue list, it must be copied from its submaster memory location to the cue list
master. Press; [copy],[Bank B] (optional),[f/a] (source cue list number),[cue list flash].
Fade up the cue list master to reveal the first step.
When a cue list is idle, its output comes from the current step. The step that will follow this
step is called the next step. When a crossfade is initiated, the cue list master performs a
Dipless Crossfade from the current step to the next step. When the cue list reaches the last
step, it will wrap around to the start.
13.4.1 PLAYBACK OF THE THEATRICAL MEMORY LIST
Not implemented at writing of manual.
13.4.2 CUE LIST INTENSITY LEVEL
The OVERALL output level of a cue list is controlled by the cue list master. The cue list can
be manually faded in or out as required or the cue list may be flashed via its [cue list flash]
button.
13.4.3 CUE LIST VIDEO
To see a comprehensive display of the status of the cue list on the optional video output,
HOLD [function], tap [f/a] (video 3).