Operation Manual

DOMINO 24 & 48 USER MANUAL
www.adblighting.com
User Manual - page 60
Issue 1.2
18.9 SOFTWARE UPGRADE
18.9.1 OVERVIEW
The DOMINO operating system (firmware) can be upgraded via an USB device.
To upgrade your DOMINO you will also need the latest version of the DOMINO software.
Notifications of new versions of the DOMINO software are posted on the ADB website,
download area.
Each DOMINO model has its own version of the software. Note which model of DOMINO you
are upgrading and select the correct one when you download the software from the web site.
Before any software upgrade save any shows that you want to keep.
Download the latest file and if available read the “read me” file for the latest instructions
18.9.2 USB DEVICE UPLOAD
To upload a new firmware place the USB device in the USB port then;
HOLD [function], tap [f/a] (disk),[no] [no] [yes].
Upgrade Desk, press [yes],
This will destroy all memories, continue? press [yes].
Upgrade version.... ? press [Yes]
Checking upgrade file ....
Upgrade takes 1 to 2 mins. Yes when ready ? press [Yes]
During upgrade the monitor will display nothing.
After upgrade a reset complete is done, and the upgrade is finalised.
18.9.3 CODELINK
If the DOMINO is not responding to the USB device (or you have no USB option) and you
need to perform an update or reinstalling software; in that case you need to use the
CODELINK Kit.
If you do not have a CODELINK kit either contact ADB or an ADB distributor or you can
download the software and instructions from the ADB website, www.adblighting.com
.