User guide

System Settings
The System Settings screen contains some of the configuration
parameters you may want to change. They are as follows:
Default CA System – This option is inactive.
Dolby Digital - If you want to enjoy the surround sound and you
are using a Dolby Digital device (e.g. Home Cinema system), set
the Dolby Digital option to Yes.
Note: If you set this option to Yes, the sound will only be available
on the S/PDIF.
Auto Upgrade in Standby – If this option is set to Yes, and you
switch your receiver into standby mode, after about one hour, the
receiver will check whether a new software version is available.
If a new software version is detected, the upgrade is carried out
automatically.
If you set the Auto Upgrade in Standby option to No, the upgrade
process is not carried out automatically and you will be informed
about the upgrade possibility once you have switched on your
receiver.
Auto Upgrade in Operate – If this option is set to Yes, the
receiver checks for new versions of software also in operate mode.
When the process of checking is initiated, you are informed about
it by means of suitable messages appearing on the screen. You
can define the time and frequency of these checks by means of
the Check Time and Check Repeat options.
USING YOUR RECEIVER
26