Service manual

Trouble Shooting
Service Manual - page 14 www.adblighting.com
Issue 0.9
5.2 Problems with Top-Box and Display
Trouble/Symptom Origin Solution
No Display after 1 min. power
On
Main Supply Fuse is blown
24 V Cable Unplugged or
Ground and +24 v wire
inverted (see chapter 6.1 for
electrical connection)
24 V Supply Out of order (see
chapter 6.3.1 to verify
voltages)
Top Box Board Out of order
Control and Change Main Fuse (see
user Manual)
Control 24 V power supply Connection
Replace 24 V power supply (see
chapter 7.4)
Replace top Box Board (see chapter
7.5)
No Control of the WARP by
Art Net
Bad Ethernet Connection
Bad Ethernet Configuration
Control and replace external Data
Cable (Ethernet LED must flicker)
Control Sub-net and Universe on the
WARP Web Page
NO
NO
NO
NO