Service manual

Technical Description
www.adblighting.com Service Manual - page 31
Issue 0.9
Functions:
This board PCB 1525 is designed to:
• Control Pan and Tilt (magnet encoding)
• Control the lamp relay
Components:
Components you can change on this board are:
• Fuse 2A (spare part code 1001.65.300)
Reset procedure:
Absolute Positioning Mode
In this mode, there is no resetting procedure. When you switch on the WARP/M, the board knows
the exact Pan & Tilt position via the AMR sensors.
Reset Mode
This mode could be used if you have a problem with one AMR sensor. (See User Manual to change
mode).
In Reset mode, when you switch on the WARP/M, Pan and Tilt go to mechanical 0 position, then go
to DMX Value.