Service manual

Motorised Yoke

Service Manual - page 58 www.adblighting.com

Issue 0.9

7.21 Remove Coarse TILT Ring

Required Tool(s) Spare Part Code Preliminary reading

Flat Screwdriver

Metric Open ended

spanner 8

1001.65.810 Chapter 7.18

1. Put the screw driver into the axis to lock the position

2. Use the Open ended spanner to tighten the nut.

3. Remove the axis from the arm

4. Unclip the magnet from the Plastic Gear.

Notice:

To clip a new magnet into the plastic

gear, you can use silicone glue to

lock it.

Magnet Position

for the New Ma

net

1001.65.810 includes :

 1 Magnet

 1 ring

 2 Washers

 1 Screw

 1 Nut

 1 Circlip