Service manual

Motorised Yoke
Service Manual - page 74 www.adblighting.com
Issue 0.9
8.1.2 How to place the new lamp Assembly
5 - Fix the safety cable on the new lamp
Assembly, using the Screw M3*6 (put
the washer between lamp plate and
earth wire
)
.
6 - Unclose the new Lamp Assembly using
the 4 black taptite screws.
7 - Screw the 2 Finger Screws with the 2
springs.
Finger Screw
Spring
4 - Pass the safety cable through the
Lamp Cable hole of the new lamp
handle.