Service manual

WARP Head
www.adblighting.com Service Manual - page 87
Issue 0.9
8.8 Replace the Front Lens on 22°-50° WARP
Required Tool(s) Spare Part Code Preliminary reading
Flat Screw Driver
Screw Driver PZ2
1001.61.330 Chapter 8.12
1. Unplug the WARP
2. Open the two lenses cover
3. Put Front and back lenses at 0
4. Remove the 3 screws
5. Remove the 3 isolations and Clips
6. Change the Lens
1001.61.330 includes:
 Front Lens 22°-50°
 3 New screws
 3 Isolations
 3 ADB Clip