Service manual

WARP Head
WARP Head
Service Manual - page 90 www.adblighting.com
Issue 0.9
8.11 Remove / Change Front Filter cassette
Required Tool(s) Spare Part Code Preliminary reading
Screw Driver PZ2
Hexagonal H5
1001.61.500 None
1. Unplug the WARP
2. Open the two lenses cover
3. Remove the 2 screws M6 on the front
4. Remove the Filter Cassette
WARNING:
Due to mechanical adjustment, some
WARP were manufactured with a
small sheet spacer between the filter
cassette and arms.
Before you remove the cassette, make
note of the spacer position, to replace
it correctly.
Don’t forget the Safety
Wire Attachment
1001.61.500 includes:
 1 Complete Filter Cassette
 2 screws M6 * 30
 2 Locking Washers
 2 Safety Wire Attachment