User's Manual

Interwave Wave2000 BSS Specification Printed 11/21/02 12:29 PM
Interwave Wave2000 BSS Specification.docInterwave Proprietary Information 25 of 32
3 - Neighbor BSS Parameters.
4 - L3 Parameters.
Enter selection (1-4):
Figure 8-13 Configuration Manual
Choose the 1
st
option, BSC Parameters, and the following manual will show on the screen:
showConfig
System Configuration Menu
1 - BSC Parameters.
2 - BTS Parameters.
3 - Neighbor BSS Parameters.
4 - L3 Parameters.
Enter selection (1-4): 1
1:alarmDelay = 4
2:cellID = 2
3:cellMSCID = 0
4:disableCheck = 1
5:keepAliveTx = 25
6:keepAliveRx = 30
7:localTimeOffset = 50
8:telsecPresent = 0
9:mscIp = 207.23.93.8
10:mscPort = 5000
11:maxTIARTimeOut= 1
12:numOfBts = 1
13:numNeighBSS = 0
14:pdsnip = 192.168.1.123
15:sysName = InterWAVEScon
16:sysContact = InterWAVE Communications
17:sysLocation = Walnut Creek, CA
18:snmpMgrIpAddr = 192.168.1.80
19:snmpTrapPort = 162
20:snmpRequestPort = 161
Press ENTER to continue, c to change parameter, q to quit.
21:thisBscID = 1
22:timingCardDelay = 0
23:ssn = 252
24:mscPresent = 0
Press ENTER to quit, c to change parameter.
value = 0 = 0x0
->
Figure 8-14 BSS parameters manual
Change the following parameters according to the system setting:
08. telsecPresent 0= Indoor Pico,1 = Micro Cell, 2 = Outdoor Pico
Cell.
12. numOfBts Number of CHC in the system, i.e. PICO Cell can
be 1 or 2.
Next, Choose the 2
nd
option, BTS Parameters, and choose the CHC card which need to be configured, for
example, if there’s two CHC card in the MICRO Cell, enter 1 to configure the primary CHC card, enter 2 to
configure the secondary card.