User's Manual Part 2

Appendix
C
– Compliance Information
All LGCell systems comply with Optical Fiber Safety Standard IEC/EM60825-2.
The LGCell distributed antenna system is rated as a Class 1 laser hazard system. It
has an absolute maximum output power of -11.5 dBm at 1300 nanometers (nm).
There are no restriction on the location or use of an LGCell system. No special
precautions are required if standard work practices are followed. Additional
information on the safe use of optical fiber communications systems is at the end of
this appendix.
The following provides LGC Wireless’ LGCell system approval status for various
countries around the world. Some European countries require National Type
Approval to their national standards (such as Germany).
DAS9M-2-W:
Telecom: A200296L (BAPT 222 ZV 15/ETS 300 609-4) and ETS 300 609-4,
October 1998
EMC: EN 300 339, June 1998, EN 61009-4-6, 1996, and EN55022/CISPR
22 Class B
Safety: Power Supplies, Astec International Ltd., Model LPS 43, Universal
Micro Electronics Co. Ltd., Model UPO651S-02, and International
Power Sources, Inc., Model UPO651S-02 all have CB scheme
certifications.
Markings: The German Type Approval mark is required as well as the UK
approval number. The CE mark is also required.
DAS18M-2-W:
Telecom: ETS 300 609-4, October 1998
EMC: EN 300 339, June 1998
Safety: Power Supplies, Astec International Ltd., Model LPS 43, Universal
Micro Electronics Co. Ltd., Model UPO651S-02, and International
Power Sources, Inc., Model UPO651S-02 all have CB scheme
certifications.
Markings: The UK approval number and the CE mark are required.