User's Manual Part 2

4-8 LGCell Installation
2 Connect Power and Power Up
After mounting the Main Hub, connect the
AC power cord to the Main Hub. Plug the
power cord into an outlet providing AC
power (88-264 VAC). See 1 in graphic.
Power up the Main Hub by flipping the
power switch from position
0
to
position
1
. See 2 in graphic.
The
POWER
and
SYNC
LEDs on the front
panel should be green (lit).
3 Connect the MMF cables
Using the procedure below, connect all
MMF cables (two per port) to the MMF
ST-female connectors (labeled
DOWN
and
UP
) on the Main Hub front panel. Use any
available Main Hub port.