User's Manual Part 1

vi About This Manual
This manual uses the following symbols as described.
This symbol represents additional INFORMATION.
It is used to emphasize text with unusual importance, special
significance, or to provide supplemental information.
This symbol represents CAUTION.
It alerts users that a given action or omitted action can cause or
contribute to a hazardous condition. Damage to the equipment can
occur.
This symbol represents WARNING.
It appears when a given action or omitted action can result in
catastrophic damage to the equipment or cause injury to the user.
Precautions
This section describes general safety precautions for LGC
ell
products and safety
precautions for Fiber Ports on the hubs.
General Safety Precautions
The following precautions apply to LGC
ell
products.
• LGC
ell
has no user-serviceable parts. Faulty or failed units are fully
replaceable through LGC Wireless. Please contact us at 1-800-530-9960. For
international customers, please contact us at [phone].
• Never input an RF signal to the Main Hub Duplex port that is higher than those
defined on page 17 in
Section 2, LGCell Equipment
.
• Although modeled after an Ethernet/LAN-like architecture and connectivity,
LGC
ell
units (Main Hub, Expansion Hub, and the Remote Antenna Unit) are
not intended to connect to Ethernet data hubs, routers, cards or other similar
data equipment.
• For improved air circulation, be sure to leave at least one inch (25 mm) of
space between all hubs and between any other equipment in the rack. If
mounting a hub on the rack’s bottom shelf, also leave at least a one inch of
clearance from the bottom.