User's Manual Part 4

4-6 LGCell Installation
LG
Cell
system installation includes the following tasks:
• Installing Main Hub
• Installing Expansion Hubs
• Installing Remote Antenna Units (RAUs) and antennas
• Connecting RF cables
• Connecting CAT 5 cables
• Connecting MMF cables
• Optimizing the system
These procedures tell you how the LG
Cell
should respond during various phases of
the installation. If it is not responding as it should, see
Section 6, Common
Problems, Troubleshooting, and Frequently Asked Questions
.
Equipment Inspection
Check that all standard equipment was shipped. (See
LGCell Standard Equipment,
on page 5.) If the equipment is damaged or parts are missing, contact LGC Wireless
immediately, at 1-800-530-9960 in the U.S. or, for international customers, at
[phone].
Most problems during installation are caused by improperly terminated
UTP/STP and MMF.
LGC
ell
Configuration
If you are installing a Dual-Band LG
Cell
system, use the following steps,
from here through “RF Cable Connection” on page 16 of this chapter.