User's Manual Part 6

C-8 Appendix C – Compliance Information
LG
Cell
fiber optic system is -11.5 dBm. Therefore there is no restriction as to
location of use of the LG
Cell
system and there is no labeling requirement.
Suggested Work Practices
The LG
Cell
is covered under these parts of section D7 of 60825
The following working practices are suggested for working on the LG
Cell
system:
•
Viewing Fiber:
Do not stare with unprotected eyes at the connector ends of the
fibers or the ports of the hub.
•
Test Fibers Cables:
When using test fiber optical cables, the optical power
source shall be the last to be connected and the first to be disconnected.
•
Fiber ends:
Any unconnected fiber ends should be covered with an approved
cap. Do not use tape.
•
Broken Fiber Cables:
Do not stare with unprotected eyes at any broken ends
of the fibers. Report and have any broken fiber cables replaced.
•
Cleaning:
Use only approved methods for cleaning optical fiber connectors.
•
Modification:
Do not make any unauthorized modifications to this fiber
optical system of associated equipment.
•
Live work:
Live work is permitted on the LG
Cell
as it is a class 1 hazard.
•
Signs:
No warning signs are required.
•
Test Equipment:
Use class 1 test equipment.