User's Manual Part 6

A-3
Cables and Connectors
The following cables and connectors are required for connecting
LGCell.
They are
not provided with the LGC
ell
equipment and must be on site or installed at the site
prior to the LGC
ell
installation. LGC wireless can provide and install these cables
and connectors.
Determine which cables (and their length) and connectors you need, then order
them through a cable vendor or installer.
Coaxial Cable – RF Transmission
Standard Coaxial Cable for Duplex RF Connections
• Connects the Main Hub to a roof-mounted antenna, repeater, or duplex MBS.
• Provides bi-directional downlink and uplink transmission with one cable for
duplex RF connections.
Standard Coaxial Cable for Simplex RF Connections
• Connects a Main Hub to a simplex MBS, a simplex roof-mounted antenna, or
repeater.
• Provides unidirectional downlink and uplink signals on separate cables for
simplex RF connections.
MMF Cable with ST-Connectors –
RF Transmission (Vertical Run)
Standard Multi-Mode Fiber Optic Cable
• Connects Main Hub to Expansion Hubs
• Transmits (downlink) and receives (uplink)
cellular and/or PCS signals.
• Accommodates distances up to 1 km.
a028
MMF
Cable