User Manual

ADCP-75-192 • Issue 1 • December 2005 • Preface
Page x
 2005, ADC Telecommunications, Inc.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio & television reception.
ETL: This equipment complies with ANSI/UL 60950-1 Information Technology Equipment.
This equipment provides the degree of protection specified by IP24 as defined in IEC
Publication 529. Ethernet signals not for outside plant use.
FDA/CDRH: This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This
product conforms to all applicable standards of 21 CFR Part 1040.
IC: This equipment complies with the applicable sections of RSS-131. The term “IC:” before
the radio certification number only signifies that Industry Canada Technical Specifications
were met.
Wind Loading: The CXD RAN is able to withstand wind loads up to 150 mph.
ACRONYMS AND ABBREVIATIONS
The acronyms and abbreviations used in this manual are detailed in the following list:
AC Alternating Current
ANT Multi-band Antenna
APEC AC Power Entry Card
AWG American Wire Gauge
BER Bit Error Rate
BIM Base Station Interface Module
BTS Base Transceiver Station
C Centigrade
CD-ROM Compact Disk Read Only Memory
COM Common
CPU Central Processing Unit
DAS Distributed Antenna System
DC Direct Current
DHCP Dynamic Host Configuration Protocol
DNS Domain Name Service
DPEC DC Power Entry Card
EIA Electronic Industries Association
EMS Element Management System
ESD Electrostatic Discharge
F Fahrenheit
FBHDC Full Band Hub Down Converter
FCC Federal Communications Commission
FDA Food and Drug Administration
FSC Forward Simulcast Card