User Manual

ADCP-75-192 • Issue 1 • December 2005 • Preface
Page vii
 2005, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This Operation Manual provides the following information:
• An overview of the Digivance CXD system.
• A description of the basic system components including the Digital Chassis, RF
Chassis, RAN, CPU, STF2, FBHDC, HUC, SIF, FSC, RSC, RDC, RUC, APEC,
DPEC, cPCI Power Supplies, and RFA.
• Procedures for turning-up the system and verifying that the system is functioning
properly.
• Procedures for maintaining the system including troubleshooting problems and
replacing faulty components.
• Product warranty, repair, return, and replacement information.
The procedures for installing the Hub and RAN equipment and for installing and using the
EMS software are provided in other publications which are referenced in the Related
Publications section and at appropriate points within this manual.
RELATED PUBLICATIONS
Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-3891,
extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada).
Title/Description ADCP Number
Digivance CXD/NXD Hub Installation and Maintenance Manual 75-193
Provides instructions for installing and maintaining the Digivance CXD Hub
equipment.
Digivance CXD Radio Access Node Installation and Maintenance Manual 75-194
Provides instructions for installing and maintaining the Digivance CXD Radio
Access Node (RAN).
Digivance CXD/NXD SNMP Agent and Fault Isolation User Guide 75-195
Provides instructions for using the Digivance SNMP Agent to control and
monitor the system and software and troubleshooting system performance.
Digivance CXD /NXD Element Management System User Manual 75-199
Provides instructions for using the Digivance EMS to control and monitor the
system and software and troubleshooting system performance.