User Manual
Table Of Contents
- SECTION 1: Overview
- SECTION 2: Description
- SECTION 3: Host Unit Installation
- SECTION 4: Operation
- SECTION 5: Maintenance
- SECTION 6: General Information
- ABOUT THIS MANUAL
- RELATED PUBLICATIONS
- ADMONISHMENTS
- GENERAL SAFETY PRECAUTIONS
- STANDARDS CERTIFICATION
- LIST OF ACRONYMS AND ABBREVIATIONS
- SECTION 1: Overview
- SECTION 2: Description
- SECTION 3: Host Unit Installation
- 1 before starting installation
- 2 OSP Fiber Cable Installation Guidelines
- 3 WDM mounting procedure (optional accessory)
- 4 HU mounting procedure
- 5 Chassis ground connection
- 6 coaxial cable connections
- 7 optical connections
- 8 controller area network connections
- 9 service interface connection
- 10 external alarm system connections
- 11 dc power connections
- SECTION 4: Operation
- 1 before starting operation
- 2 turn-up system and verify operation
- 2.1 Turn-Up Procedure
- 2.2 Download HU and RU System Software
- 2.3 Determine Forward Path Input Signal Level
- 2.4 Enter Site Name and Site Number
- 2.5 Enter Host Forward Attenuation
- 2.6 Determine Output Signal Level at STM Antenna Port
- 2.7 Enter Remote Forward Attenuation
- 2.8 Enter Host Reverse Attenuation
- 2.9 Enter Host Forward and Reverse Delay
- SECTION 5: Maintenance
- SECTION 6: General Information
ADCP-75-126 • Issue B • April 2002 • Section 4: Operation
Page 4-6
©
2002,
ADC
Telecommunications,
Inc.
26. Reconnect
the
external
alarm
system
or
notify
the
alarm
system
provider
that
the
turn-up
process
has
been
completed.
2.2 Download HU and RU System Software
The
HU’s
and
RU’s
may
require
a
system
software
download
to
make
them
operational.
Use
the
following
procedure
to
download
the
system
software:
1. Click
on
the
HOST
Prg
Load
tab
and
on
the
REMOTE
Prg
Load
tab.
The
HOST
Prg
Load
display
and
the
Remote
Prg
Load
display
will
open
within
the
EMS
main
window
as
shown
in
Figure 4-3.
Figure 4-3. HOST and REMOTE Prg Load Displays
2. Click
on
the
HOST
Select
button
(see
Figure 4-3).
The
Select
Control
Program
File
window
will
open
as
shown
in
Figure 4-4.
Browse
until
the
folder
where
the
Control
Program
files
are
located
is
selected
and
the
software
files
are
displayed
in
the
window.
Click to open Select Control
Program window for HOST
Click to start down-
load to HOST.
Click to start down-
load to REMOTE.
Click to open Select
Control Program win-
dow for REMOTE.
Verify software version
before starting download.
Verify software version
before starting download.