User Manual
Table Of Contents
- ABOUT THIS MANUAL
- RELATED PUBLICATIONS
- ADMONISHMENTS
- GENERAL SAFETY PRECAUTIONS
- STANDARDS CERTIFICATION
- LIST OF ACRONYMS AND ABBREVIATIONS
- 1 DESCRIPTION
- 2 HARDWARE AND SOFTWARE REQUIREMENTS
- 3 APPLICATION
- 4 EMS SOFTWARE GRAPHICAL USER INTERFACE
- 5 TROUBLESHOOTING AN RLM ALARM
- 6 CUSTOMER INFORMATION AND ASSISTANCE
ADCP-75-191 • Preliminary Issue B • November 2005 • Preface
Page v
© 2005, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This publication provides supplemental information about Digivance LRCS 800 and 1900 MHz
Systems that are equipped with the Reverse Link Monitor (RLM) feature. An overview of the
Digivance Long Range Coverage Solution (LRCS) System, a complete description of the
system components, the system turn-up and test procedures, and the system troubleshooting
procedures are provided in the applicable Digivance System Operation and Maintenance
Manual (see Related Publications section).
RELATED PUBLICATIONS
Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-3891,
extension 73476 (in U.S.A. or Canada) or 1-952-917-3476 (outside U.S.A. and Canada).
Digivance LRCS 800/900 MHz SMR System with Version 3.01 EMS Software
Operation and Maintenance Manual 75-179
Digivance LRCS 800 MHz System with Version 3.01 EMS Software
Operation and Maintenance Manual 75-156
Digivance LRCS 1900 MHz System with Version 3.01 EMS Software
Operation and Maintenance Manual 75-153
Digivance LRCS SMR System with Version 3.01 EMS Software
Operation and Maintenance Manual 75-170
ADMONISHMENTS
Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below) and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
Title ADCP Number
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.