Product Manual

ManualsBrandsADC ManualsEmergency KitsWindow Punch Tool with Pocket Clip

Special

Thank You...

Thank you for choosing an ADC

emergency product. We're

proud of the care and quality that goes into the manufacture of

each and every item that bears our name. Only the finest

materials are used to assure you of a timeless instrument

designed for optimum performance. You'll quickly appreciate

the results, for you now own one of the finest emergency tools

that money can buy. With proper care and maintenance, your

ADC

product is sure to provide you with many years of

dependable service. Please read the following instructions and

general information which will prove helpful in allowing you

to enjoy your ADC

product.

Thank you for your patronage. It is indeed our pleasure to

serve you.

Sincerely,

American Diagnostic Corp.

Care of your ADC

Nylon holster

Your ADC

Responder nylon holster is made from durable

1000D nylon, lined with cushioning foam. Pocket Organizer

is made from 420D nylon.

When soiled, wash by hand in cold water with a mild soap.

Never use bleach. Allow holster to air dry. Never iron over

hook & loop fasteners-heat from the iron will damage them.

The instrument pockets might be tight initially, but will

stretch within a few weeks. Never overload nylon holsters as

this may damage the seams or cause the nylon to wear pre-

maturely. We recommend that you do not put sharp-tipped

instruments (such as splinter forceps) inside your nylon hol-

ster. If, however, you find it necessary to carry a sharp-tipped

instrument, place a protective cover (such as a plastic pen

cap) over the tips.

To convert your snap-on belt loop to a perma-

nent belt loop

If you do not require the convenience of a snap-on belt loop,

and instead prefer the security of a permanent loop you can

convert your ADC

nylon holster as follows:

1. Obtain a “super glue” or epoxy at your local

convenience store.

2. Making sure snaps are clean and dry; apply 2 or 3 drops

to the male portion of each snap, along the rim and

outer edge.

3. Snap both snaps closed and allow glue to set according

to the directions on the glue package.

4. Test that glue snaps hold. If either snap doesn’t hold

repeat the process.

Use of your ADC Knife:

Selected holster sets are equipped with the ADTOOL

multifunction tool or Puma lockback knife. Both feature

blades forged from 440 surgical stainless steel, tempered

to a Rockwell hardness of C57-59.

The ADTOOL

includes pliers, wire cutters, 2" knife blade,

3 flathead screwdrivers of varying sizes, a can opener,

2" serrated blade, bottle opener, and Phillips head screw-

driver. To use pliers grip handles from either side, and pry

apart fully. To access all other components grip handles

from either side and pry apart. Fully extend the desired

component and then close handles to create a secure

gripping surface.

The PUMA 2002

is a 4” lockback knife with serrated

blade. Thumb activation allows one handed use. It has an

integral pocket clip built into the lightweight handle.

To open: Press your thumb against the raised guide on the

blade and pivot until it locks.

To close the blade: Depress the metal bar on the back of

the knife and push the blade into its chamber until it clicks.

Care of your ADC Knife:

Keep the blade clean and dry. Wipe fingerprints and

moisture off after each use with a soft cloth or chamois.

Keep the locking mechanism free of debris. An occasional

drop or two of light oil on working parts will promote

smooth operation and long life. Never use knife blade as a

chisel, or to cut metal objects.

Care of your Medicut

or MiniMedicut

Shears

Your Medicut

#320 and MiniMedicut

#321 shears, are

designed to withstand heavy use. Polypropylene handles,

and hardened stainless steel blades assure durability. Never

use on thick metal objects, such as a coin- this will damage

blade edge. Keep blades clean and dry to prevent corrosion.

To Sterilize: Medicut

and MiniMedicut

shears may be

ETO gas, or steam sterilized to 289.4° F (143° C)

Care of your ADC Window Punch (Optional)

Your spring loaded window punch #360 has a lightweight

corrosion resistant aluminum barrel with a knurled finish

intended for positive grip.

To Use: Only use on tempered glass. Wear protective

clothing. Position point of punch in corner of window near

frame and push until spring releases with a sharp “snap-

ping” sound. Repeat as necessary.

USE, CARE, &

MAINTENANCE

OF YOUR ADC

PRODUCT

What is Covered: Repair, or replacement of parts, and

labor.

What is not covered: Transportation charges to and from

ADC. Damages caused by abuse, misuse, accident, or

negligence. Incidental, special, or consequential damages.

Some states do not allow the exclusion or limitation of

incidental special or consequential damages, so this

limitation may not apply to you.

To Obtain Warranty Service: Send item(s) postage paid

to ADC, Attn: Repair Dept., 55 Commerce Dr., Hauppauge,

NY 11788. Please include your name and address, daytime

phone no., proof of purchase, a brief note explaining the

problem, and $2.00 to cover the cost of return shipping and

handling.

Implied Warranty: Any implied warranty shall be limited

in duration to the terms of this warranty and in no case

beyond the original selling price (except where prohibited

by law). This warranty gives you specific legal rights and

you may have other rights which vary from state to state.

To Adjust Strength: Twist rear cap clockwise to increase

strength, counterclockwise to decrease strength.

Use & Care of your ADC

Penlight

ADlite

#356W. To activate, depress pocket clip. Release

to turn off.

Care of your Surgical Instrument(s)

Floor grade surgical instruments are made of 410, 420, or 440

stainless steel. Keep clean and dry. Never use scissors to cut

metal or heavy objects.

Limited Warranty

American Diagnostic Corporation (ADC

) warrants its products

against defects in materials and workmanship under normal

use and service as follows:

1. Warranty service extends to the original retail

purchaser only and commences with the date of

delivery.

2. Holsters, Instruments, and accessories are warranted

for one year.

3. Medicut

and MiniMedicut

shears are warranted

fo 2 years from date of delivery.

4. Adtool

and Puma 2002

are warranted for life.

Comments or Questions

Call

1-800-ADC-2670

To Register Your Product, visit us at www.adctoday.com

and follow the links

ADC

55 Commerce Drive

Hauppauge, NY 11788

ADC (UK) Ltd.

Unit 6, PO14 1TH

United Kingdom

tel: 631-273-9600

toll free: 1-800-232-2670

fax: 631-273-9659

www.adctoday.com

info@adctoday.com

IB p/n 9310-00 rev 5 Printed in the U.S.A.