Adtemp™ 423 Digital Thermometer Use, Care and Maintenance ®
Congratulations on your purchase of the ADTEMP™ Digital Fever Thermometer. Please read the instructions carefully to ensure accurate temperatures and safe operation. When used properly, this high quality product will give you years of accurate, dependable service. BATTERY COVER 98.6°F SENSOR TIP DISPLAY WINDOW MULTI-FUNCTION BUTTON SAFETY INFORMATION: • High, prolonged fever requires medical attention especially for young children. Please contact your physician.
HOW TO TAKE TEMPERATURE: 1. Place a probe cover carefully over the tip. Select oral, underarm or rectal as your measurement site based on the individual requiring a temperature measurement (Figure 1). Fig. 1 2. Push the Multi-Function button located beside the disF play window. The thermometer will beep and the display will read: “188.8 °M . This is a function check indicating the unit is working properly. The last measured temperature will be displayed for approximately 2 seconds.
do not turn the unit off, it will shut off automatically in approximately 10 minutes. OPERATION OF THE °F - °C FEATURE (Changing the measuring scale) From the “OFF” position, hold down the Multi-Function button for 5-sec. The thermometer will automatically change from °F - °C or °C - °F. Release the button. You may toggle between °C and °F. After 3-sec. in one scale the °C or °F will flash, indicating ready to measure.