AdtempTM 427 TempleTouch Thermometer TM USE, CARE & MAINTENANCE
Intended Use: A Temple Touch thermometer is a device which enables accurate body temperature measurements obtained by using a unique probe, which measures the heat flow from the blood vessels to the skin and converts it to body temperature from the temple area in approximately 6-8 seconds. Safety Information: • High, prolonged fever requires immediate medical attention, especially for young children. • Do not allow children to take their temperatures unattended.
Quick Start: 1. Press and release the MULTI-FUNCTION button. 2. Wait 2 seconds. 3. Hold firmly to temple, wait for beep. 4. Read results. 5. Before re-measuring: wait at least 1 minute. Measuring Guidelines: 1. Measurement body location is the temple, in proximity to the temporal artery, between the end of the eyebrow and hairline. 2. Do not place the thermometer on scarred tissue compromised by skin disorder, open sores or abrasions and patients in trauma. 3.
. Place the thermometer's probe in the center of the temple area between the end of the eyebrow and the hairline. Gently press and hold it against the temple to ensure good contact with the skin is maintained (Figures 4a + 4b). Correct placement and good contact with the skin ensure reliable readings. 5. As soon as the thermometer is in place, the measurement will start automatically. A running circle will appear indicating that the measurement is progressing successfully (Figure 5).
Changing the battery: To install/replace, first switch off the device. Remove the battery cover by sliding it out of its housing. Firmly attach the batteries to their place, making sure polarity is correct. (see engraving on the bottom of battery compartment). Slide the battery cover back into place. Troubleshooting and special indications: The thermometer has been designed to display feedback-warnings to ensure proper usage and accurate temperature measurement.
Er.2: If the temperature did not register because of poor contact, patient movement or poor placement, the device will beep 5 times and display “Er.2” Remedy: Turn the unit OFF, wait 1 minute, turn it ON again and retake temperature using proper technique. Er.3: If the unit malfunctioned, the device will beep 5 times and display “Er.3” Remedy: Do not use the thermometer – Call 1-800-232-2670 for service. Low Battery: Battery icon is on continuously.
Specifications Feature Performance / Data: Measurement location: Measurement range: Operation environment: Storage environment: Measurement readout: Accuracy: Display: Battery: Battery life: Weight: Dimensions: Memory: Auto shut off: Case material: Probe material: Warranty: Measurement time 6-8 seconds Temple area of the forehead 95°F to 107.6°F (35°C to 42°C) 60.
Parts and Assembly Non-invasive sensor Display Window Multi-Function Button WARRANTY This Thermometer is guaranteed for a period of 24 months from date of purchase. This warranty does not cover batteries, or damage resulting from improper handling or use. Specific legal rights stipulated in your state may guide this warranty. If you have a legitimate claim under this warranty, send item(s) postage paid to Service Center, Attn: Repair Dept., 55 Commerce Dr., Hauppauge, NY 11788.
To register your product visit us at www.adctoday.com/register This manual is available online in a variety of languages, follow the links for language options. www.adctoday.com/care Grand Bond Electronics Ltd Room 2208 22/F CCT Telecom Bldg. 11-19 Wo Shing Street Fotan, New Territories, Shatin Hong Kong EC REP Distributed by: ADC® 55 Commerce Drive Hauppauge NY 11788 Made in China www.adctoday.
