Diagnostix ADSTATION TM TM Modular Diagnostic System Instruction Manual Questions? Call ADC toll free: 1-800-232-2670
1. A SPECIAL THANK YOU Congratulations on your purchase of an ADC® Diagnostix™ Adstation™. ADC® professional diagnostic products are the instruments of choice where accuracy and dependability are critical. With proper use and care these physical exam and non-invasive diagnostic instruments will provide many years of dependable service. Read this booklet thoroughly before attempting to use your new ADC® Diagnostix™ Adstation™. 2. INTRODUCTION - INTENDED USE This manual is for the Diagnostix™ Adstation™.
Diagnostix™ Adstation™ devices. Warning: Do not use batteries, electrical cords other than those included with this product or replacement parts supplied by the manufacturer. Warning: This product may contain a chemical known to the state of California to cause cancer, birth defects, or other reproductive harm. Caution: The standard material used is latex-free. Attention: Some wall systems may include up to 3 additional extension modules.
Tuck excess wiring into each extension to ensure a close sideby-side fit to each extension module. 1. 2. 3. Take the extension module and guide the screw heads through the openings (1). Then press the extension module downwards. (See illustration). Attention: Take care that the connecting cable does not get caught behind the extension module. Push the connecting cable into the groove provided on the reverse side of the extension module.
in the rocker switch (3) indicates that the instrument is ready to use. Each handle (5) is automatically ready to operate at 100% light intensity as soon as it is taken out of the cradle (7). The handle automatically switches off when replaced back into the cradle (7). 7.1. LIGHT INTENSITY MODULATION The modulation of light intensity can be done with the handle; twist the switching ring in a clockwise or counter-clockwise direction and the light will get stronger or weaker.
9. TECHNICAL SPECIFICATIONS Model: 5660T ADC® Diagnostix™ Adstation™ Transformer Voltage: 120V~/50-60 Hz* (U.S.A.) 230V~/50-60 Hz (Europe) Input: 22 VA Output: 1 x 3,5V--- / 2 x 12V Output Current: 1 x 700mA / 2 x 1000mA Fuse: 2 x T 160 mA Classification: Application part type B Operating Temperature: 32°F-104°F (0° C to + 40° C) Storage Temperature: 23°F-122°F (-5° C to + 50° C) up to 85 % relative humidity Dimensions: Diagnostic Station: 7.88” x 7.12” x 2.95” (200 x 180.
11. WARRANTY This Diagnostix™ Adstation™ transformer and extension modules are warranted for 5 years from date of purchase. Instruments heads are warranted for 2 years. The warranty does not apply to damage caused by improper handling, accidents, improper use, or alterations made to the instrument by third parties. The warranty is only valid after the product is registered online at www.adctoday.com. 12.