Digital Blood Pressure Monitor Advanced Blood Pressure Monitors Models 6021, 6022, 6023 User’s Manual PLEASE NOTE: THIS MEDICAL INSTRUMENT MUST BE USED ACCORDING TO INSTRUCTIONS TO ENSURE ACCURATE READINGS.
A Special Thank You... Thank you for choosing an ADC® AdvantageTM blood pressure instrument. We're proud of the care and quality that goes into the manufacture of each and every item that bears our name. Only the finest materials are used to assure you of a timeless instrument designed for optimum performance. You'll quickly appreciate the results, for you now own one of the finest digital blood pressure instruments that money can buy.
strument on a child. In cases of irregular heartbeat (Arrhythmia), measurements made with this instrument should only be evaluated after consultation with your doctor. • Familiarize yourself with the section titled "Important Information on Blood Pressure and its Measurement". It contains important information on the dynamics of blood pressure readings and will help you to obtain the best results. NOTE! This device contains sensitive electronic components.
period” (Diastole) pressure is lowest (diastolic blood pressure value). Blood pressure values must lie within certain normal ranges in order to prevent particular diseases. 2.2. Which values are normal? Blood pressure is very high if your diastolic pressure is above 90 mmHg and/or your systolic blood pressure is over 160 mmHg, while at rest. In this case, please consult your physician immediately.
These measures must be permanent lifestyle changes. A) Eating habits • Strive for a normal weight corresponding to your age. See your doctor for your ideal weight. • Avoid excessive consumption of common salt. • Avoid fatty foods. B) Previous illnesses • Consistently follow all medical instructions for treating illness such as: • Diabetes (Diabetes mellitus or sugar diabetes) • Fat metabolism disorder • Gout C) Habits • Give up smoking completely. • Drink only moderate amounts of alcohol.
Each Model has its own specific cuff: Model Item Number Description 6021 850-6013 D-bar Nylon Cuff For arm circumference 22 - 32 cm or (8.7” - 12.6”) 6022 850-6022 Wide Range Soft Cuff For arm circumference 22 - 41 cm or (8.7” - 16”) 6023 850-6023 Wide Range Rigid Cuff For arm circumference 22 - 46 cm or (8.7” - 18.1”) * If you ever need to buy a replacement cuff, use only ADC® brand. Note: Arm circumference should be measured with a measuring tape in the middle of the relaxed upper arm.
Position “1” and to select Averaging Mode, upwards to Position “3”. If you select 1 then only one measurement will be taken. If you select 3, the unit will inflate and deflate three times resulting in one final average measurement. 4.5. Select the User (6022, 6023 models only) This blood pressure monitor is designed to store 99 measurements for each of two users. Before taking a measurement, be certain that the correct user has been selected.
5.2. Common sources of error: Note: Comparable blood pressure measurements always require the same conditions! Conditions should always be quiet. • All efforts by the user to support the arm can increase blood pressure. Make sure you are in a comfortable, relaxed position and do not flex any of the musLeft Arm cles in the measurement arm during the measurement. Use a cushion for support if necessary.
The hook and loop closure must be facing outward. (Ignore this step if the cuff has already been prepared.) b) Place the cuff over the left upper arm so that the tube is closer to your lower arm. c) Lay the cuff on the arm as illustrated. Make certain that the lower edge of the cuff lies approximately 3/4” to 1” (2 to 3cm) above the elbow and that the tube is closer to the inner side of the arm.
If one of the measurements causes an error message, it will be repeated one more time. If any additional error occurs, the measurement will be discontinued and an error code will be displayed. Expanding the averaged measurement to see the three individual readings: This function allows you to view the three individual measurements used to calculate the ADC® Averaging Mode Technology™ measurement.
The traffic light dots rise according to your measurement. If your measurement has only one dot, your measurement is in the green zone, or “Normal” according to NIH standards. • If your measurement has two or three dots, it is in the yellow zone, or “Pre-Hypertension” according to NIH standards. • If your measurement has four dots, it is in the orange “Stage 1 Hypertension” zone. • If your measurement has five or more dots, it is in the red “Stage 2 Hypertension” zone.
5.9. Setting the Medication Reminder (6023 only) This instrument allows you to set two alarm times at which an alarm signal will then be triggered. This can be a useful aid, for instance as a reminder to take medication or to remind you to take your blood pressure at the same time each day.
Which batteries and which procedure? Use four new, longlife 1.5V AA batteries. Do not use batteries beyond their expiration date. If the monitor is not going to be used for a prolonged period the batteries should be removed. Using rechargeable batteries You can also operate this instrument using rechargeable batteries.
7. Error Messages/Troubleshooting If an error occurs during a measurement, the measurement is discontinued and a corresponding error code is displayed. We recommend you switch the device off and take a new measurement making sure you allow time for relaxation (Example: err 3). Err 1 Possible cause(s) / Solutions The tube may have loosened, or no pulse was detected. *Ensure cuff connections are tight with proper cuff placement. See Section 5.3 Err 2 Unnatural pressure impulses.
Every measurement results in different values, although the device functions normally and normal values are displayed. • • Please read the following information and the points listed under “Common sources of error”. (Section 5.2) Repeat the measurement. Blood pressure changes constantly. The observed readings may accurately reflect your pressure. Blood pressure values differ from those measured by my doctor. • • Record daily values and consult your doctor.
10. Certifications Device standard: This device is manufactured to meet the European and United States standards for non-invasive blood pressure monitors: EN1060-1 / 1995 • EN1060-3 / 1997 • EN1060-4 / 2004 AAMI/ANSI SP10 Electromagnetic compatibility: Device fulfills the stipulations of the International standard IEC60601-1-2 Clinical testing: Clinical performance tests were carried out in the U.K. “Association Protocol and British HTP Protocol.” The B.H.S.
12. How to Contact Us Toll Free Help Line: 1-800-ADC-2670 Email: info@adctoday.com EC REP Inspected in the U.S.A. Made in China tel: 631-273-9600, 1-800-232-2670 fax: 631-273-9659 ADC EC REP 55 Commerce Drive Hauppauge, NY 11788 U.S.A. www.adctoday.com EC REP ADC (UK)EC Ltd.REP Unit 6, PO14 1TH United Kingdom IB p/n 93-6023-00 rev 2 english EC REP email: info@adctoday.
